A (Running) Bolt for New Reasons

We construct a four-parameter family of smooth, horizonless, stationary solutions of ungauged five-dimensional supergravity by using the four-dimensional Euclidean Schwarzschild metric as a base space and "magnetizing" its bolt. We then generalize this to a five-parameter family based upon the Euclidean Kerr-Taub-Bolt. These "running Bolt" solutions are necessarily non-static. They also have the same charges and mass as a non-extremal black hole with a classically-large horizon area. Moreover, in a certain regime their mass can decrease as their charges increase. The existence of these solutions supports the idea that the singularities of non-extremal black holes are resolved by low-mass modes that correct the singularity of the classical black hole solution on large (horizon-sized) scales.Comment: 25 pages, 3 figures, LaTeX; v2: minor changes, references adde

Simulation of waste heat recovery system with fuzzy based evaporator model

The organic Rankine cycle (ORC) is one of the promising waste heat recovery (WHR) technologies used to improve the thermal efficiency, reduce the emissions and save the fuel costs of internal combustion engines. In the ORCWHR system, the evaporator is considered to be the most critical component as the heat transfer of this device influences the efficiency of the system. Although the conventional Finite Volume (FV) model can successfully capture the complex heat transfer process in the evaporator, the computation time for this model is high as it consists of many iterative loops. To reduce the computation time, a new evaporator model using the fuzzy inference technique is developed in this research. The developed fuzzy based model can predict the evaporator outputs with an accuracy of over 90% while it reduces the simulation time significantly. This model is then integrated with other components of the ORC to simulate a completed ORC-WHR system for internal combustion engines. The influence of operating parameters on the performance of the WHR system is investigated in this paper

The CWKB particle production and classical condensate in de Sitter spacetime

The complex time WKB approximation is an effective tool in studying particle production in curved spacetime. We use it in this work to understand the formation of classical condensate in expanding de Sitter spacetime. The CWKB leads to the emergence of thermal spectrum that depends crucially on horizons (as in de Sitter spacetime) or observer dependent horizons (as in Rindler spacetime). A connection is sought between the horizon and the formation of classical condensate. We concentrate on de Sitter spacetime and study the cosmological perturbation of $k=0$ mode with various values of $m/H_0$. We find that for a minimally coupled free scalar field for $m^2/H_0^2<2$, the one-mode occupation number grows more than unity soon after the physical wavelength of the mode crosses the Hubble radius and soon after diverges as $N(t)\sim O(1)[\lambda_{phys}(t)/{H_0^{-1}}]^{2\sqrt{\nu^2-1/4}}$, where $\nu\equiv (9/4 -m^2/{H_0^2})^{1/2}$. The results substantiates the previous works in this direction. We also find the correct oscillation and behaviour of $N(z)$ at small $z$ from a single expression using CWKB approximation for various values of $m/H_0$. We also discuss decoherence in relation to the formation of classical condensate. We also find that the squeezed state formalism and CWKB method give identical results.Comment: 19 pages, revtex, 5 figure

Distribution of dwell times of a ribosome: effects of infidelity, kinetic proofreading and ribosome crowding

Ribosome is a molecular machine that polymerizes a protein where the sequence of the amino acid residues, the monomers of the protein, is dictated by the sequence of codons (triplets of nucleotides) on a messenger RNA (mRNA) that serves as the template. The ribosome is a molecular motor that utilizes the template mRNA strand also as the track. Thus, in each step the ribosome moves forward by one codon and, simultaneously, elongates the protein by one amino acid. We present a theoretical model that captures most of the main steps in the mechano-chemical cycle of a ribosome. The stochastic movement of the ribosome consists of an alternating sequence of pause and translocation; the sum of the durations of a pause and the following translocation is the time of dwell of the ribosome at the corresponding codon. We derive the analytical expression for the distribution of the dwell times of a ribosome in our model. Whereever experimental data are available, our theoretical predictions are consistent with those results. We suggest appropriate experiments to test the new predictions of our model, particularly, the effects of the quality control mechanism of the ribosome and that of their crowding on the mRNA track.Comment: This is an author-created, un-copyedited version of an article accepted for publication in Physical Biology. IOP Publishing Ltd is not responsible for any errors or omissions in this version of the manuscript or any version derived from it. The definitive publisher authenticated version is available online at DOI:10.1088/1478-3975/8/2/02600

The information paradox: A pedagogical introduction

The black hole information paradox is a very poorly understood problem. It is often believed that Hawking's argument is not precisely formulated, and a more careful accounting of naturally occurring quantum corrections will allow the radiation process to become unitary. We show that such is not the case, by proving that small corrections to the leading order Hawking computation cannot remove the entanglement between the radiation and the hole. We formulate Hawking's argument as a `theorem': assuming `traditional' physics at the horizon and usual assumptions of locality we will be forced into mixed states or remnants. We also argue that one cannot explain away the problem by invoking AdS/CFT duality. We conclude with recent results on the quantum physics of black holes which show the the interior of black holes have a `fuzzball' structure. This nontrivial structure of microstates resolves the information paradox, and gives a qualitative picture of how classical intuition can break down in black hole physics.Comment: 38 pages, 7 figures, Latex (Expanded form of lectures given at CERN for the RTN Winter School, Feb 09), typo correcte

Weakly coupled, antiparallel, totally asymmetric simple exclusion processes

We study a system composed of two parallel totally asymmetric simple exclusion processes with open boundaries, where the particles move in the two lanes in opposite directions and are allowed to jump to the other lane with rates inversely proportional to the length of the system. Stationary density profiles are determined and the phase diagram of the model is constructed in the hydrodynamic limit, by solving the differential equations describing the steady state of the system, analytically for vanishing total current and numerically for nonzero total current. The system possesses phases with a localized shock in the density profile in one of the lanes, similarly to exclusion processes endowed with nonconserving kinetics in the bulk. Besides, the system undergoes a discontinuous phase transition, where coherently moving delocalized shocks emerge in both lanes and the fluctuation of the global density is described by an unbiased random walk. This phenomenon is analogous to the phase coexistence observed at the coexistence line of the totally asymmetric simple exclusion process, however, as a consequence of the interaction between lanes, the density profiles are deformed and in the case of asymmetric lane change, the motion of the shocks is confined to a limited domain.Comment: 14 pages, 15 figures, to appear in Phys. Rev.

Intertwining Relations for the Deformed D1D5 CFT

The Higgs branch of the D1D5 system flows in the infrared to a two-dimensional N=(4,4) SCFT. This system is believed to have an "orbifold point" in its moduli space where the SCFT is a free sigma model with target space the symmetric product of copies of four-tori; however, at the orbifold point gravity is strongly coupled and to reach the supergravity point one needs to turn on the four exactly marginal deformations corresponding to the blow-up modes of the orbifold SCFT. Recently, technology has been developed for studying these deformations and perturbing the D1D5 CFT off its orbifold point. We present a new method for computing the general effect of a single application of the deformation operators. The method takes the form of intertwining relations that map operators in the untwisted sector before application of the deformation operator to operators in the 2-twisted sector after the application of the deformation operator. This method is computationally more direct, and may be of theoretical interest. This line of inquiry should ultimately have relevance for black hole physics.Comment: latex, 23 pages, 3 figure

Cool-clave – an energy efficient autoclave

Out-of-autoclave (OOA) manufacturing techniques for composites result in 7 lower fibre volume fractions than for fully compressed laminates. The lower fibre volume 8 fraction produces a higher resin volume fraction which becomes resin-rich volumes (RRV) 9 [1]. Textile reinforcements with clustered fibres and consequent RRV generally have low 10 strength but high in-plane process permeability, whereas the opposite is true for uni-11 formly distributed fibres [1, 2]. The inevitable increase in resin volume fraction of OOA 12 composites often compromises composite performance and leads to relatively higher 13 weight and fuel consumption in transport applications. Retention of autoclave processing 14 is recommended for highest performance when compression press moulding in not ap-15 propriate (for example, for complex 3D components). The traditional autoclave processing 16 of composites heats not only the component to be cured but also parasitic air and the ves-17 sel insulation. Subject to minor modifications of the pressure vessel, electrically heated 18 tooling could be implemented [3]. This approach would need to balance insulation of the 19 heated tool surface (and any heater blanket on the counter-face) against the quenching 20 effect during introduction of the pressurised cool air. This process optimisation would 21 significantly reduce energy consumption. Additionally, the laminate on the heated tool 22 could be taken to the end of the dwell period before loading the autoclave leading to sig-23 nificant reductions in cure cycle times. Components could be cured simultaneously at dif-24 ferent temperatures provided there are sufficient power and control circuits in the auto-25 clave. While autoclave processing has usually involved vacuum-bagged pre-impregnated 26 reinforcements, implementation of the cool-clave technique could also provide scope for 27 using the pressure vessel to cure vacuum-infused composites

Optimizing Traffic Lights in a Cellular Automaton Model for City Traffic

We study the impact of global traffic light control strategies in a recently proposed cellular automaton model for vehicular traffic in city networks. The model combines basic ideas of the Biham-Middleton-Levine model for city traffic and the Nagel-Schreckenberg model for highway traffic. The city network has a simple square lattice geometry. All streets and intersections are treated equally, i.e., there are no dominant streets. Starting from a simple synchronized strategy we show that the capacity of the network strongly depends on the cycle times of the traffic lights. Moreover we point out that the optimal time periods are determined by the geometric characteristics of the network, i.e., the distance between the intersections. In the case of synchronized traffic lights the derivation of the optimal cycle times in the network can be reduced to a simpler problem, the flow optimization of a single street with one traffic light operating as a bottleneck. In order to obtain an enhanced throughput in the model improved global strategies are tested, e.g., green wave and random switching strategies, which lead to surprising results.Comment: 13 pages, 10 figure

Control of supercritical organic Rankine cycle based waste heat recovery system using conventional and fuzzy self-tuned PID controllers

This research develops a supercritical organic Rankine cycle (ORC) based waste heat recovery (WHR) system for control system simulation. In supercritical ORC-WHR systems, the evaporator is a main contributor to the thermal inertia of the system, which is greatly affected by transient heat sources during operation. In order to capture the thermal inertia of the system and reduce the computation time in the simulation process, a fuzzy-based dynamic evaporator model was developed and integrated with other component models to provide a complete dynamic ORC-WHR model. This paper presents two control strategies for the ORC-WHR system: evaporator temperature control and expander output control, and two control algorithms: a conventional PID controller and a fuzzy-based self-tuning PID controller. The performances of the proposed controllers are tested for set point tracking and disturbance rejection ability in the presence of steady and transient thermal input conditions. The robustness of the proposed controllers is investigated with respect to various operating conditions. The results show that the fuzzy self-tuning PID controller outperformed the conventional PID controller in terms of set point tracking and disturbance rejection ability at all conditions encountered in the paper